5
After filling the glass jar with ingredients, place the lid with measuring cup
securely onto the glass jar.
Plug the product into a standard 220-240Va.c. electrical outlet.
Turn the Dial to “1” or “2” setting or hold the dial switch in “P” position.
CAUTION:
Never operate the product empty.
WARNING! The maximum operating time is 1 minute. Allow it to rest for at
least 2 minutes before using it again. After 5 cycles of operation, cool down the
motor to room temperature. Allow to cool down for approx. 30 minutes before
using it again.
NOTE:
If the blades are not operating smoothly, stop the product and add some
liquid, or reduce the contents in the glass jar.
To blend food for a short time, pulse operation can be selected by turning the dial
switch to “P” setting. Hold the dial switch at “P” setting for this function. To stop
blending, release the dial switch.
To use the ice crush function, hold the dial switch at “P” setting. Release the dial
switch to stop crushing.
IMPORTANT!
Use ice cubes only approximately 2cm
3
in size.
Turn off the product by turning the dial to “0” position, and then unplug the
product from the mains power outlet.
WARNING: Always unplug the product from mains power when it is not in
use or when left unattended.
When the Blades have stopped turning, the glass jar can be removed from the
motor housing.
IMPORANT!
To prevent premature wearing on the fly-wheel, remove the glass
jar from the motor housing only when the blades have come to a complete stop.
