ON/OFF power switch:
Off / Wired Mode: Switch off the gaming mouse in wireless mode.
Wired mode: Connect the provided USB-C cable to a free USB port on the computer
Eco Mode: Switch wireless power saving mode (roller light off and logo light on).
ON / Wireless mode: Switch to wireless mode with all LED lights on.
Connecting the Mouse
Plug the USB receiver into a free USB port on the computer.
The computer will recognize the receiver and install the driver automatically.
Charging
Plug in the provided USB-C cable to the USB-C port of mouse, connect the other end of
USB-C cable into the free USB-A port,
the color of the wheel and logo indicate lights
turns green and last for 10 seconds.
After the mouse is fully charged, the indicate lights change to orange and lasts about
10 seconds.
Change CPI
The default CPI for the mouse is 1200.
Click the CPI switch repeatedly to change the setting in the following order:
1200CPI→3200 CPI→4800 CPI→7200 CPI→10000CPI
Safety Instructions:
Please read the instruction manual before using this device and follow all the safety
instructions to avoid damage caused by improper use.
Keep the instruction manual for future reference. Should this device be given to a third
party, then this instruction manual must also be handed over.
Only use this appliance indoors
Keep the appliance away from all hot surfaces and naked flames.
Always put the appliance on a level, stable, clean, dry surface. Protect the appliance
from extreme heat and cold, dust, direct sunlight, humidity and drops or jets of water.
Do not immerse the appliance in water or in other liquids.
Do not open the housing under any circumstances.
Do not introduce any objects into the interior of the housing.
Should the device malfunction due to electrostatic discharge or a short power surge,
disconnect it from your computer and then reconnect it again.
