anko 43032983, Быстрый старт

Страница: 15 / 16

15 | Daybreak
USB charging ports
1. You can charge two external devices by connecting them to the USB charging
ports (13 & 14) on the back of the your alarm clock.
2. Your devices battery charge status will usually be shown on it’s display.
• There may be some radio interference while charging.
• Please charge devices using one charging method at a time (wireless or USB).
• Please do not try to charge the same device using the wireless charging function
and one of the USB charging ports (13 or 14) at the same time.
Backup batteries
Please Note: These batteries are for backup only and will not power your alarm clock
just save the time, date and alarm settings when mains power is cut or disconnected.
The alarm clock has a backup battery feature. Please insert 2x AAA batteries (not
supplied) into the battery compartment on the underside of your alarm clock (see
page 6). This will ensure that time and alarm settings are remembered if the alarm
clock is unplugged or there is a power cut.
Specifications
Power Adapter Input: 100-240V~50/60Hz
Power Adapter Output: 9V
𝌂
3.5A, 31.5W
(CW0903500AU)
Wireless Charging: Up to 10W
USB Outputs: 2x 5V
𝌂
2.1A (Total)
Speaker Output 2x 5W
FM Frequency Range: 87.5 - 108MHz
FM Presets: x10
Backup Battery Requirement: 2x AAA 1.5V
Remarks:
1. The marking label is located at the bottom enclosure.
2. The wireless charging will only reach 10W when the USB port is not in use.