30
|
5.1.1. Mounting of the base
Screw the base with 4 screws (1) and (2) on to the checkout desk. The type and length of
screw depends on the material used for the checkout furniture (wood, metal, plastic). The
two screws (2) should be countersunk screws.
5.1.2. Electronical connection
Warning!
A free wheel diode is necessary for the intended operation of a cashier
system / POS component (e.g. printers). Operation without a free
wheel diode is not allowed.
Open the lever to secure the cable connection (1). Place the round connector of the cable
(2) in the port of the base and connect the other end to the POS system.
