Anker eufy SECURITY, Руководство пользователя

Страница: 4 / 28

03 English English 04
Add HomeBase to the System
1. Power on the HomeBase, and then use the ethernet cable provided to connect
HomeBase to your home router. The HomeBase can also be connected via Wi-Fi
through the eufy Security app.
2. The LED indicator will turn blue (this may take up to 1 minute) when HomeBase is
ready for setup.
3. Follow the on-screen instructions to add Homebase to the system and to
complete the setup.
Add Other Devices
Follow the instructions in the Entry Sensor / Motion Sensor / Keypad User Manual to
add each device to your system.
KEY FEATURES
Security Mode
On the eufy Security app, go to the Security page to set your security modes:
Away, Home, Customize and Disarm. In each security mode, the device list displays
all devices connected to the same HomeBase. You could customize whether the
HomeBase rings an alarm or sends you alarm alert notifications when the device is
triggered.
Away mode: All sensors are activated and your house will be monitored. The system
is armed and operational. Any human or entry will be detected and an alarm will be
triggered. Recommended using when you are away from home.
Home mode: Interior sensors are disabled, while exterior sensors are activated.
Recommended using when you are at home and want to be alerted about any
potential break-ins outside the house.
Customize mode: Recommended if you feel a customized security mode is needed to
match your specific life requirements.
Disarm mode: All detection functions are disabled. No sensors are activated and
no alarm alerts will be sent. Recommended using when you are experiencing issues
with your devices. The Away, Home, and Customize modes can be edited. You can
choose to push notifications or send alarm alerts on the eufy Security app.
Note:
You can set a leaving delay and alarm delay in each mode.
• Leaving Delay
If you activate a security mode with an alarm action and you have to pass by a
triggered device before leaving your house, you can set a delay time. The delay allows
you to leave home without triggering any alarm. You should leave the house before
the countdown ends.
By default, the leaving delay is disabled in each security mode. When you need to set
leaving delay for a certain mode, you can select the device that needs the delay and
determine a countdown from 0s to 300s.