Anjon Flood Pump
Please read these instructions completely before using one of Anjon Pond
Pumps in the table below.
Model
Rated
Voltage
Rated
Current
Input
Motor
Flow
Max
Total
Head
Max.
Operation
Depth
FL-1200
120V, 60Hz
2.35A
EM12000
2000 G/h
20 ft
6.5 ft
FL-2100
120V, 60Hz
2.45A
EM12500
3000 G/h
21 ft
6.5 ft
FL-3200
120V, 60Hz
2.55A
EM15000
4000 G/h
21 ft
6.5 ft
These pumps are used as submersible and non-submersible pumps
provided with overload-protected devices in garden ponds, fountains,
terraced fountains, indoor fountains to circulate and oxygenate clear water.
You can use the suction cups or four screws to mount it. If mounted to
appropriate base, make sure that the appliance is securely installed before
operation.
These pumps are not for use in swimming pools!
CAUTION:
These pumps should be installed according
to your local electrical code. Please contact an electrician. For
all technical data, please refer to the content stated on the rating
label of the pump.
p. 1
WARRANTY
Anjon Manufacturing (Anjon) warrants to you, the original purchaser, that the
products listed below will be repaired or replaced free of charge it fails to
work due to defects in material and workmanship within a period of 2 years
from the date of original purchase.
Flood Pump Models: FL-1200, FL-2100, FL-3200
This warranty is subject to the following terms and conditions:
1.)
Should it be necessary to return the product during the warranty
period, it may be shipped, at the owner’s expense, to Anjon
Manufacturing, Warranty Services, 1000 Liberty Industrial Drive,
O’Fallon, MO 63366. Warranty claims must be accompanied by proof
or purchase, either written or by prior registration of the product at
www.anjonmfg.com/warranty.
2.)
An RMA (return merchandise authorization) form must be completed
before returning any item for warranty evaluation and/or repair.
3.)
Anjon’s decision on all questions related to alleged defects and
repair shall be conclusive,
4.)
Repair parts or replacement product will be given on an exchange
basis and will either be new, equivalent to new, or reconditioned. All
customer returned parts or products we replace become the property
of Anjon.
5.)
The warranty or extended warranty protection does not cover normal
wear and tear, nor any deterioration suffered through freezing water
in the product, improper use, negligence or accident. Similarly,
modifications made to this product by the purchaser or installer shall
invalidate this warranty.
6.)
This warranty does not cover UV bulbs (unless damaged or broken
in shipping from Anjon to the original purchaser), filter media or bio
balls.
7.)
This warranty does not invalidate your statutory rights, but preserves
your full benefits.
8.)
Anjon does not assume and will not accept liability for compensation
for any loss or damage whatsoever sustained by the purchaser.
p.7
