Anita Garudan GIF-2500, Руководство пользователя, Страница: 9 / 89

© ANITA
MP03400CZ_181010 9
4. LUBRICATION
1. Lubrication oil and cooling oil:
Please use Garudan m22, Mobil #10 or equivalent oil for lubrication oil and use silicone oil for cooling
oil.
2. Feeding oil:
The lubrication oil has been drained off completely before delivery, adding oil to the upper line of oil
gauge (c) by removing seal plug (a). Also, please make sure the oil flows out of nozzle (b) at the start
of operation.
Before starting a brand new machine or a machine which has not been used for more than a couple
of weeks, lubricate the needle bar first. Before using the machine, check the oil level is above the
mark L
3. Changing oil:
For the longer life of machine, change lubrication oil completely after 250 hours (or 4 weeks) of initial
operation initial operation.
A. After taking off belt cover, remove v-belt from motor pulley, and remove machine head from
machine table.
B. Loosen screw (d) and drain off all the oil from the machine.
C. After draining, tighten screw (d) back.
D. When replenishing oil please refer to paragraph 4-2 "feeding oil" above.
www.garudan.cz