Anima Paul PA1200600NRZ, Руководство пользователя и правила технического обслуживания

Страница: 6 / 14

PAUL
Required Material
Suitable Valves
Screwdriver
Electric drill
Drill Bit (8 mm.)
Spirit level
Allen key (3 mm) (G)
Stepladder (if required)
Symbol
A
B
C
D
E
F
Air vent 1/2 “ Cap
Wall Plug
Wall Mounting Bracket Screw Ø
6,3 mm. x 60 mm.
Screw (M6 x6)
Blind plug 1/2 “
1
2
4
4
4
4
1
Assembly Instructions
• Gently pull the radiator out of its box and cover.
• Sufficient PTFE tape must be applied to valve- tail threads
prior to their installation.
• Silicone thread sealant should be applied to all threaded
components manufactured with ‘O-rings’.
• Using the radiator and a spirit level, mark the position of
the brackets according to where the radiator is to be fixed.
• Mark the centers of the brackets on the wall (D).
• Drill four 8 mm diameter holes to a minimum depth of
60mm & insert wall plugs (C).
• Screw brackets (D) into wall plugs (C) with 6,3 mm diameter x
60mm screws (E).
• Slide boss on radiator into bracket (D) and secure in
position by tightening grub screw (F) with Allen key (G)
• Check the radiator is mounted perfect otherwise slide the
radiator from mounting brackets.
• Install the radiator minimum 12,5 centimeters above the
ground.
• Plump the radiator to the heating circuit.
E
D
C
B
A
F
G