Anilam 5000M CNC, Руководство пользователя

Страница: 17 / 36

CNC Motion Setup/Testing Utility
P/N 70000510B
14 All rights reserved. Subject to change without notice.
31-January-05
Table 4, Table of Fault LED Conditions (5 LEDs)
Input or Fault
Condition
RUN
LED
HS/ECB
LED
LS/ECB
LED
OVER VOLT
LED
OVER TEMP
LED
FAULT
OUTPUT
NORMAL
OPERATION ON OFF OFF OFF OFF GROUND
LIMIT + (ON) ON OFF OFF OFF OFF GROUND
LIMIT – (ON) ON OFF OFF OFF OFF GROUND
CLAMP (ON) OFF OFF OFF OFF OFF GROUND
RESET (ON) OFF OFF OFF OFF OFF PULL-UP
EXT. FAULT OFF OFF OFF OFF OFF PULL-UP
UNDER VOLTAGE
(+15V) OFF OFF OFF OFF OFF
PULL-UP
HS/ECB (LATCHED) OFF
ON
OFF OFF OFF
PULL-UP
LS/ECB (LATCHED) OFF OFF ON OFF OFF PULL-UP
OVER VOLTAGE B+
(LATCHED) OFF OFF OFF ON OFF PULL-UP
OVER TEMP
(LATCHED) OFF OFF OFF OFF
ON PULL-UP
For LED fault conditions 1 LED servo amplifiers, see
Figure 7, ANILAM
Servo Amplifier (1 LED), P/N 33000123 or Table 5 .
Table 5, Table of Fault LED Conditions (1 LED)
Green Red Condition
ON OFF RUN
ON 2 FLASHES +/– LIMITS
OFF OFF AMPLIFIER INHIBIT
OFF ON RESET
OFF 1 FLASH OVER TEMPERATURE
OFF 2 FLASHES OVER VOLTAGE
OFF 3 FLASHES LS/ECB
OFF 4 FLASHES HS/ECB