CNC Motion Setup/Testing Utility
P/N 70000634A
All rights reserved. Subject to change without notice.
23-December-05
3
MST Soft Keys
NOTE:
Select an active axis before you select an MST command
(
F1
–
F10
).
NOTE:
MST soft keys are displayed while the MST screen is active.
Access MST utility features using the labeled soft keys located below the
screen on the console. Press the corresponding soft key (
F1
–
F10
) to
activate the function.
Refer to
Table 2
for soft key names and functions.
Table 2, MST Soft Key Functions
Soft Key
Name
Function
F1 ClrFld
Clears prompt field in SigGain and Tuning tests.
F2
ResChk
Calculates the resolution of the active axis.
Troubleshooting tool.
F3 IndexP
Detects Index Pulse and displays an indicator over
the Active Axis line of the MST screen.
Troubleshooting tool.
F4
Manual
Cancels active MDI or test command.
F5
MDI
Activates an MDI prompt.
F6
Balance
Sends out the signal needed to Balance the outputs
of the system (0.0 VDC). Used to balance the
Motion Control Board and the Servo Amplifiers.
F7
SigGain
Allows you to set the servo amplifier signal gain for
the active axis.
F8
Tuning
Activates the Tuning Pop-Up menu, which allows the
CNC to determine optimum PID filter values from the
specified parameters and save the results.
F9 Misc
Miscellaneous tests displays a pop-up menu with
options for CanBus Test. For AC motors only
additional options display on the pop-up menu:
Amplifier Test Link, Reset Amplifier, Backup Amp
Settings, and Restore from Backup. These tests can
only be activated with the Servo Amplifier Test Board
installed. See “
F10 Exit
Returns the CNC to the Software Options screen.
(S
HIFT
+
F4)
Home
Performs a Homing Sequence on all axes configured
for homing.
Содержание 4200T CNC
Страница 1: ...www anilam com ...