!
POWER TOOL SAFETY RULES
CLEANING
Always disconnect power from the tool before cleaning.
Always wear safety goggles when using compressed dry air for cleaning.
Ventilation openings and switch levers must be kept clean and dry.
Do not attempt to clean by inserting pointed objects through openings.
Certain cleaning agents and solvents may damage plastic parts. Some of these
are carbon tetrachloride, gasoline, chlorinated cleaning solvents, ammonia and
household detergents that contain ammonia.
GENERAL TOOL SAFETY
Staying within the tool’s designed limits will give you great results as well as a
safe & enjoyable time fulfilling your projects. Treat your JOOLTOOL™ with care.
NOTE:
Always hold the workpiece with
BOTH HANDS
.
It is safer and will provide better control of your work.
Use only light pressure when working.
Never apply excessive pressure or
torque on the disc, the spindle or any attached accessory while using the tool.
NOTE:
Your JOOLTOOL™ may have an automatic “power-down” safety feature.
When excessive pressure is detected, the disc speed is reduced. If this happens,
reset your JOOLTOOL™ : turn the switch to “OFF”, unplug & replug the cord.
Always use accessories and attachments for their intended applications.
Use only Jooltool-approved accessories with this JOOLTOOL® unit.
Never use the tool with any accessories that seem damaged or excessively
worn. If in doubt, turn the tool “OFF” immediately and inspect carefully. Replace
any badly worn or broken accessories.
Always pay close attention around rotating wheels or discs.
Fingers can
get hit by the spinning disc.
Never try to stop the wheels with your hands or with any object.
Allow the tool to come to a complete stop before changing attachments or
accessories.
5
