manualshive.com logo in svg

Anie Jooltool, Руководство пользователя

Поделиться
Скачать
Anie Jooltool Скачать руководство пользователя страница 11

OPERATION

THESE ARE GENERAL RULES OF OPERATION INTENDED AS GUIDELINES ONLY. 
FOR MORE INFORMATION, CONSULT THE PROVIDED 

INSTRUCTIONAL DVD.

FOR LONG FLAT-EDGED TOOLS

RULE OF THUMB:
Follow the steps described on the previous page 
while GRADUALLY & EVENLY moving/gliding 
the tool’s edge from RIGHT to LEFT under the disc. 
You may stop anytime by simply lowering the tool 
as described previously in STEP 3. 

AVOID “TEETER-TOTTERING” THE TOOL ON THE DISC!
DO NOT SLIDE TOOL OFF THE EDGE OF THE DISC!

FOR ROUNDED ANGLES/BEVELS: 

 
RULE OF THUMB: 
The same steps apply as stated previously. 
Keep the edge held against the abrasive.
Then, in a GRADUAL (LEFT to RIGHT ) 
MOTION, slowly FOLLOW the ROUND surface 
of the tool by twisting it or moving the handle. 
For lathe gouges with a fingernail shape: 
Move the handle of the tool like a pendulum.

PLEASE REFER TO THE PROVIDED 

ABRASIVE QUICK REFERENCE CHART

 OR SEE 

NEXT PAGE FOR THE DIFFERENT APPLICATIONS OFFERED BY YOUR ABRASIVES. 

!

 

 

REMEMBER!

 

 

PLEASE OBEY ALL SAFETY RULES! 

 

 

See 

POWER TOOL SAFETY RULES

 section of this manual.

11

Содержание Jooltool





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды