Anglerfish Creative Lighting TRIGGER V2.0, Руководство пользователя

Страница: 13 / 18

p.9 Anglerfish Crea�ve Ligh�ng | Anglerfish Trigger V2.0
While the trigger is charging the small amber chip LED will
light up. When the charge is finished the green chip LED will
light up. Do not charge the trigger while powered on .
Troubleshooting
Not Turning On
If upon impact the purple menu LED does not blink, it is likely
that the unit ’ s batery has been depleted and require a full
charge.
Menu LED Blinking Red and Blue:
If the menu LED blinks red and blue upon start up or during
opera�on this means that the batery voltage is low and that
the unit requires to be fully charged.
Op�cal Trigger not Working:
If the op�cal trigger does not trigger the remote strobe,
remove the fiber op�c cable from the unit and inspect the
small high power LED inside the op�cal bulkhead. Operate