8
1
1
Mounting the Ringlight
Light Stand
1. To mount the Ringlight on a light
stand, loosen the mounting handle’s
locking knob, and place the receiver
over the light stand’s 5/8-inch pin.
2. Make sure the receiver fits complete-
ly around the pin before you tighten
the locking knob. If it doesn’t, contin-
ue to loosen the locking knob until the
fixture drops down around the pin.
3. Tighten the locking knob until the
Ringlight is secure.
Tripod
The Ringlight is compatible with tripods
that have a 1/4-20 threaded mounting
bolt. To mount the Ringlight directly onto
a tripod:
1. Remove the mounting handle by
loosening the locking wheel until the
handle comes off.
2. Screw the Ringlight onto the tripod’s
1/4-20 mounting bolt until snug.
