5
Installation & Setup
If you have followed steps 1-4 completely, you have completed the basic
setup and you are ready to start enjoying wireless cable TV provided the
transmitter and receiver are on the same RF channel. If you are NOT
receiving a picture, please perform the following steps, 5 & 6.
Transmitter Setup
Go to the location of the Transmitter. Make
sure the power is on and then select the
desired AngelTrax channel by pushing the
CH button on top of the transmitter. (Any
channel is OK) As long as we select the
same AngelTrax channel on the receiver. (If
you experience interference, try a different
channel) Change the channel on both the
transmitter and receiver. They must always
match to communicate.
Press the power button on top of the
Transmitter. A red light will appear indicat-
ing the channel.
Select the desired channel by pressing the
CH button on top of the transmitter.
(STOP) Now, Make sure you turn your remote TV on
and set it to Video , Input or DVD, Game, etc....) using
the remote control that came with your TV. You should
now see a picture on your TV Screen.
3
