C
1
3
9
6
154
01
.f
m
- 5 -
English
IT
GB
DE
FR
ES
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
The illustration shows the position of the devices.
A)Gas supply tap: for turning the connection to the
gas supply line on and off.
B)Safety thermocouple: cuts out the gas supply if the
flame goes out
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)General hazard: read the manual carefully before
carrying out any procedure.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
E)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and commission-
ing instructions".
F) Burn hazard: watch out for hot surfaces.
G)CE marking: indicates that the appliance is compli-
ant with the relevant norms.
H)Arm crushing hazard: never insert hands in the
pan while in use.
L) Scald hazard: take care, very hot steam.
M)General hazard: dry operation is forbidden.
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
IDM-39615400300.tif
B
A
IDM-39615400400.tif
M
L
F
D
C
B
H
G
A
E
Содержание 191PD1G
Страница 2: ......
