Angelcare AC315, Руководство пользователя

Страница: 20 / 68

FALSE ALARMS
• Turn OFF the Camera.
• Verify the connection between the Sensor Pad and the Camera. Unplug and reconnect the cord.
• Make sure there is no bedding between the mattress and the Sensor Pad.
• If the crib has a spring or slat base, place a hardboard between the crib base and the Sensor Pad measuring at least 1/4’’ (6 mm)
thick and should have minimum dimensions of 13’’ x 13’’ (33 x 33 cm).
• Make sure the Sensor Pad is positioned as described under the setup requirements. Sensitivity
may need to be adjusted. Refer to STEP 5.1 for more information.
ALARM WILL NOT SOUND
• Avoid contact with the crib when the monitor is ON.
• Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement from outside the crib.
• You may need to decrease the sensitivity. Refer to STEP 5.1 for more information.
THE PARENT UNIT DOESN’T SHOW MOVEMENT AND TEMPERATURE REPORTS
• Make sure the time and date is set up. Refers to STEP 4.1 & 4.2.
• Make sure the movement and temperature function is activated. Refers to STEP 6.5.
20
247AC_Manuel_AC315_NA_m3.indd 20 18-03-02 16:10