Angelcare AC315, Руководство пользователя

Страница: 11 / 68

5.1 - SENSOR PAD
TO ACTIVATE/DEACTIVATE THE SENSOR PAD:
02:04 68°F
2
1) In the Sensor Pad settings, press the button to activate/
deactivate the Sensor Pad (when activated the toggle will turn blue).
2) Press the down arrow till the Save icon at the bottom will be
highlighted in blue then Press the button to save the settings.
TO TEST THE SENSOR PAD:
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
1) After activating the Sensor Pad, the alarm will sound after 20 seconds.
2) Rub you hand over the mattress to confirm the alarm stops.
MOVEMENT ALARM
• If NO movement is detected after 15 seconds you will hear a single ‘TIC’
pre-alarm sound from the Camera.
• If after a further 5 seconds there is still NO
movement detected both the Parent Unit and
Camera speakers will emit loud continous beeps. -
this is the movement alarm.
• Movement Alarm icon will show on the LCD screen.
IF THE ALARM DOES NOT SOUND
• Avoid contact with the crib while Sensor Pad is
in operation.
• Place the crib near a supporting wall to reduce
vibrations.
• Adjust the Sensor Pad sensitivity level.
• Turn OFF crib mobile, fans, loud music or
anything else that may cause vibration.
PAUSING AND RESTARTING THE SENSOR PAD:
Allows you to pause the Sensor Pad if you remove baby from the crib, e.g. for feeding or comforting.
68°F
PAUSE/UNPAUSE Sensor Pad Buttons
IMPORTANT
• If you do not pause the Sensor Pad, the alarm will sound if there is no movement after 20 seconds/if baby is
removed from the crib.
• Ensure to unpause the Sensor Pad before putting baby in the crib.
11
E
N
247AC_Manuel_AC315_NA_m3.indd 11 18-03-02 16:10