Angelcare AC310, Руководство пользователя

Страница: 10 / 30

8 cm / 3 inch
6
6) Place the 6th cord
cover approximately
8 cm / 3 inch from the
edge of the mattress
support.
4 1 3 2
CLICK!
7
7) Snap together the
remaining cord covers
that will run along the
floor.
4
3
2
1
8 9
8)
Remove any cord slack
to make sure no parts
of the cord are loose.
9) Peel off the double-
sided tape on the 4th
cord cover and place
it securely under the
crib leg.
10
10) Install the Camera on
a flat, stable surface
facing the crib at a
distance of at least
1 meter / 3 feet
and
plug the Sensor Pad
cord into the Camera.
11) Check to make sure
the Sensor Pad has not
moved from position.
12) Place the mattress
back inside the crib.
WARNING
STRANGULATION HAZARD
• Remove all slack from Sensor Pad Cord.
• When lowering the mattress support
as your child grows, slide the vertical
Cord Cover downward so it remains
approximately in the center between
the mattress support and the floor. Slide
the Sensor Pad Cord through the Floor
Cover to eliminate any additional slack.
The Sensor Pad is not designed
for use with adults, children or infants
older than 24 months.
• Discontinue used of the Sensor Pad
when child is older than 24 months.
Remove Sensor Pad from crib and store
for future use.
• BEFORE FIRST TIME USE: To test
that the unit is ready for use, refer to
instruction manual on how to test that
the installation has been done correctly.
10