Angelcare ac1300, Руководство пользователя

Страница: 9 / 39

STEP 4 - TURNING ON YOUR MONITOR
1) Remove the battery door and insert
3 AA Alkaline Batteries (not included).
2)
Place the Nursery Unit at a
minimum
of 3 feet (0.9 meter) away from the crib.
3) Connect the adapter to the Nursery
Unit and into an electrical outlet.
4)
Direct the angle of the camera toward
the crib using the rotating dial.
NOTE:
The batteries maintain power
supply in case of power outage.
2
1
3
3 ft
(0.9 m)
4
NURSERY UNIT:
Front Side Back Side
A
B
C
D
A) Adjustable Camera
B)
Power
ON
Indicator
C) Photo Sensor
D) Microphone
E)
Rotating Dial
for Camera Angle
F) Pager/Hold Button
G) POWER ON/OFF
H)
Adapter Outlet
I) Sensor Pad Outlet
J)
Battery door (Not shown)
K) Tripod Outlet*(Not shown)
L) Night Light ON/OFF
* Nursery Unit may be installed on a tripod (not included).
STEP 3 - SETTING UP THE NURSERY UNIT
1) Press and hold the Parent Unit ON/OFF
button for 2 seconds until LCD screen
is turned
ON
. Angelcare’s logo will be
shown for 1 second.
2) Push and hold the Nursery Unit Power
ON/ OFF button for 2 seconds.
3)
The Parent Unit will display
Video
mode
screen.
When Parent Unit is
turned
ON and Nursery
Unit is OFF , Parent Unit
will display
Disconnected
mode and will turn itself
OFF
after 60 seconds.
1)
If there is a lost connection between
the 2 units after 1.5 minutes, the
Out-of-Range
alarm will sound
on the Parent Unit (refer to
troubleshooting):
• The Out-of-Range icon will appear
on the screen.
• The
Lost Connection
icon will appear
on the indicator bar.
2 1
73F
E
F
L
G
I
J
H
K
9
E
N