40
9.3
UV LAMP (optional)
The ultraviolet ray lamp is generally used for ageing tests
on paints, plastic materials, rubber ....
The lamp can be installed only on machines that have been
prepared specially for the lamp at the factory; these ma-
chines have been equipped with a hole and socket in which
to fit the lamp.
The UV lamp can be used in the following temperature
range:
from 0
°
C to +40
°
C
When tests are carried out without the UV lamp, remove the
latter from the chamber and cover the hole where it fits in;
in this way a medium working life (of about 300h) will be
guaranteed for the lamp. Replace the lamp very carefully.
The UV lamp is automatically switched on.
How to assemble the UV lamp.
• Gently remove lamp L from the packaging and insert it
into the protective tube P (fig. 9.11-12).
• Push it in as far as it will go and use the screws V to fasten
the two pieces (fig. 9.13).
• Place the whole piece into position on the machine (fig.
9.14) and use the cable C supplied with the machine to
connect it to the socket K.
UV rays are dangerous to the eyes.
When the lamp is used on machines with an inspection hatch, the protective screen
must always be put into position.
CH0305-F40
CH0305-F41
P
L
Warning: Do not touch or handle the lamp
with bare hands. Always wear either
cotton or rubber gloves.
CH0305-F42
V
P
L
F
K
C
Lamp specifications:
Supply voltage:
230V
Absorption:
125W
CH0305-F43
CH0305-F44
CH0305-F45
CH0305-F46
9.11
9.12
9.13
9.14
9.15
9.16
9.17
