Installation Guide
Angel Armor Ballistic Door Panel (Level IIIA) for Dodge® Charger PURSUIT
970 235 2961 [email protected] angelarmor.com
7
Procedure
Complete the following steps
to properly install Angel Armor
Avail Ballistic Door Panels for
Dodge Charger Pursuit.
Preparing for Installation
1
Lower the window glass completely.
2
Turn off the vehicle ignition switch,
and remove the key.
3
Disconnect the vehicle battery to
avoid accidental airbag deployment.
Removing the Outer Window
Weatherstrip
Use caution when removing parts that may
have sharp edges, such as the outer
window weatherstrip.
1
Remove the outer window weatherstrip
screws at the rear and front ends of the
window frame.
2
Pull up on the rear end of the outer window
weatherstrip to remove it from the window
frame. Work forward along the window
frame, pulling up on the trim to remove it
completely.
Figure 6. Outer window weatherstrip screws
Figure 7. Removing outer window weatherstrip
