AneX QUANT, Руководство по обслуживанию

Страница: 9 / 212

EN
9
Also, the back of seat unit is equipped with a zipper pocket, where you
can conveniently store the raincoat (Fig. 34).
SEAT UNIT HOOD
The seat unit is equipped with a convenient folding hood that protects
the child from natural phenomena (wind, sun, snow, rain). The hood
can be adjusted in 3 positions by pressing its top using the hand (Fig.
35). You need to fully take off the textile kit together with the plastic
adjustment to remove the hood (Fig. 36).
For the proper protection of the child in the fully reclining position of the
back, the hood of the seat unit is equipped with an additional wedge.
To install the hood for a fully reclining position, you need to unfasten the
zipper of the additional wedge and pull the hood in the desired direction
(Fig. 37). The hood of the seat unit is ventilated, for this, it is necessary
to unfasten its lower part (Fig. 38).
FOOTREST ADJUSTMENT
The footrest can be adjusted in two directions: by the angle of inclination
and by the length (Fig. 39, 40). To change the position of the footrest,
press the button on the footrest and set the desired angle and height
(Fig. 41).
SEAT UNIT'S SECURITY BARRIER
The seat unit is also equipped with a bumper that prevents the child
from falling out of the stroller. To install the bumper - insert it in series
in the holes of the holders, which are placed on both sides of the seat
unit (Fig. 42). If necessary, remove the bumper, press the buttons in
sequence and slightly pull the handle up (Fig. 43).
SAFETY BELTS
The seat unit features 5-point safety belts (Fig. 44). They can be adjusted in
three different positions depending on the age of the child (Fig. 45). To fix
your baby with the safety belts, fit the belt buckles into the catch locks (Fig.
46). Moreover, you can adjust the length of the belts (Fig. 47). Push the button
to unbuckle the belts from the locks (Fig. 44). You can easily take off the belts
by putting them through the hole in the back of the seat (Fig. 48).