AneX AG-3040, Инструкция по эксплуатации

Страница: 6 / 8

Safety
Never remove the lld until the cutting disc has completely stopped.
Handle the cutting discs with care-they are extremely sharp.
To use the cutting discs
1) Fit the drive shaft and bowl onto the power unit.
2) Holding by the centre grip@ place the disc onto the
Drive shaft with the appropriate side uppermost @.
3) Fit the lid
4) Choose which size feed tube you want to use The
Pusher contains a smaller feed tube for processing
Individual items or thin ingredients. To use the small
Feed tube –first put the large pusher inside the feed
Tude.To use the large feed tube-use both pushers
Togerthe.
5)Put the food in the feed tube
6)Switch on and push down evenly with the pusher-
never put your fingers in the feed Tube.
Hints
Use fresh ingredients.
Don’t cut food too small. Fill the width of the large feed tube fairly full.
This prevent the food from slipping sideways during processing.
Alternatively use the small feed tube.
When using the chipper disc,place upright@ comes out shorter than
Food placed hortzontally@.
There will always be a small amount of waste on the plate or in the bowl after processing