Before using your machine
Read these instructions carefully and retain for future reference
Remove all packing and any labels
Safety
The blades and discs are very shape, handle with care
Always hold the knife blade by the finger grip at the top, away from the cutting edge,
both when handling and cleaning
Do not lift or carry the processor by the handle or the handle break resulting in injury.
Always remove the knife blade before pouring contents form the bowl.
Keep hands and utensils out of the processor bowl and liquidizer jug whilst connected to
the power supply
Switch off and unplug
before fitting or removing parts
after use
before cleaning
Never use your fingers to push food down the feed tube. Always use the pusher supplied.
Switch off
Wait until the attachment/blades have completely stopped
Be careful not to unscrew the liquidizer jug or mill form the blade unit
Allow all liquids to cool to room temperature before placing them in the liquidizer
Do not use the lid to operate the processor, always use the on/off speed control
This machine will be damaged and may cause injury if he interlock mechanism is subjected
to excessive force
Never use an unauthorized attachment
Never leave the machine on unauttended
Never use a damaged machine, if break, please get it repaired in the designated machine place
Never use water to wash power unit, cord or plug and let them dry
Don’t let the wire hang over the edge of a table or worktop or touch hot surfaces.
Do not exceed the maximum capacities stated
This appliance is not intended for use by persons (including children) with reduced physical.
Sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Only use the appliance for its intended domestic use
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your machine.
If the temperature of motor is too high, the temperature control system will be set up. And the
motor will stop working automatically. After the temperature return to the room temperature, the
motor will work again.
P2
Содержание AG-3040
Страница 1: ...AG 3040...
