Anets PASTA PRO GPC-14, Инструкция по установке и эксплуатации пользователя

Страница: 2 / 10

GPC-14/18
PASTA COOKER
SHIPPING CONTAINER INSPECTION
1. Carefully examine the shipping container for external damage. If damage is noted, notify the delivery carrier immediately. Save all packaging
materials for claim examination.
2. If no external damage is noted, remove the unit from the shipping container and carefully examine it for damage. If damage is noted, place the
unit in a safe location so that it can be inspected.
SPECIFICATIONS
* Measured at pressure tap on burner manifold.
† Measured at appliance input when all other gas powered equipment is operating.
‡ IN. W.C. = Inches, Water Column
A 115 Volt 3-pronged grounded plug is supplied with all gas units.
Refer to the inside door of the unit for the appliance wiring diagram.
LEG / CASTER INSTALLATION
1. Carefully lay cooker on its back and install legs or casters as shown in diagram A below.
2. After placing unit in installation area, adjust individual leg inserts to level cooker (so unit does not rock), by turning only the individual inserts.
Note: Appliances with casters must be secured with a restraining device to limit movement; refer to diagram B below.
Set the length of the restraining cable so
that the gas connector is not kinked when
the restraining device is fully extended.
Diagram A Diagram B Diagram C
A minimum 6-inch clearance is
required between the unit and the
site wall(s.)
MODEL INPUT BTU/H NATURAL PROPANE NATURAL PROPANE
GPC ‐ 14 111,000
GPC ‐ 18 160,000 / 80,000
MANIFOLD PRESSURE* SUPPLY PRESSURE†
ELECTRICAL REQUIREMENTS
3 ‐ 1/2 IN. W.C.‡ 10 IN. W.C.
MINIMUM 6 IN.
W.C.
MINIMUM 11 IN.
W.C.
120V, 50/60Hz SINGLE PHASE