Anest Iwata SLVB-5, Инструкция по эксплуатации

Страница: 9 / 16

9
Test operation
▪
Operation
❖
Preparation
(1) Make sure all safety warnings, labels, and instructions have been read and understood before continuing.
(2) Make sure any shipping materials, brackets, etc. are removed.
(3) Check that the electric power source and ground have been firmly connected
(4) Make sure all pressure connections are tight.
❖
Operation and check pressure increase
(1) Switch the electric source breaker on.
(2) Be sure the pressure increases when the compressor starts.
(3) Check that the compressor operates without excessive vibration, unusual noises or leaks.
❖
Check maximum control pressure
Operate the unit while the ball valve of the air receiver is closed.
Be sure the compressor stops at the pressure shown below.
Voltage Max. pressure (psi)
208V 100
230V 115
❖
Stop
Turn off unit to stop the compressor.
After the test operation ends, open the stop valve of the air outlet.