Anest Iwata MSGS-200 120L, Инструкция по эксплуатации

Страница: 13 / 30

EN
14
PROBLEM WHERE IT OCCURRED WHERE TO CHECK CAUSE TIGHTEN ADJUST CLEAN REPLACE
Air leaks
Each joint connection All joints, connections
Weak tightening X
Damaged X
Dirty X
Air cap
Gun Body
Air valve
Damaged X
Dirty X
Worn X
Air valve spring Weak spring X
Fluid leaks
Each joint connection All joints, connections
Weak tightening X
Damage on seat X
Dirty X
Fluid nozzle
Air cap set holes
Fluid Nozzle
Nozzle Holder
Weak tightening X
Damaged X
Needle spring Weak spring X
Air cap set
Damaged X
Dirty X
Weak tightening X
Fluid needle packing
set
Fluid needle packing Worn X
Fluid needle Worn X
Fluid needle packing Weak tightening X
Small or no
fluid output
Fluid supply route
Fluid pressure Pressure too low X
Filter set Clogged X X
Filter hose Clogged X X
Tip of gun
Fluid nozzle Clogged X
Safety lock Locked X
Paint viscosity Viscosity too high X
Paint resi-
due buildup
on air cap
set
Air cap set
Air cap holes
Clogged X
Deformed or damaged X
Paint build-up X
Air cap, fluid nozzle
Deformed or damaged
passages
X
Fluid nozzle
Clogged X
Worn or damaged X
Incomplete
pattern
Same as above Same as above Same as above
Atomizing air route
Atomizing air
pressure
Too low (tails occur) X
Too high (heavy at
both ends of spray
pattern)
X
16. PROBLEMS CAUSES AND REMEDIES