1. INTRODUCTION
This manual contains instructions for the installation, use and maintenance of the
IWK H2O
. In the following manual, the
IWK H2O
will be referred to as
Spray-gun washer
.
This manual is an integral part to the product and should be kept with due
care in order to allow for its use and consultation during the life of the Spray-gun washer
.
The regular operation, economy and safety of the
Spray-gun washer
depends on the compliance with the instructions given in this
manual. It is mandatory to follow the procedures as described in this manual.
This manual must be read and understood perfectly prior to installing, using or performing any type of
operation or maintenance on the machine. The Spray-gun washer must be used exclusively for the
washing of spray-guns or small parts, using water or water-based solvents with specific characteristics.
Use of the Spray-gun washer for processing other than the type indicated in this manual is considered
improper use and is therefore prohibited. ANEST IWATA EUROPE declines any and all responsibilities
for damages caused by the Spray-gun washer to persons, animals or property, due to use other than the
use described herein, or for damages due to negligence or failure to observe the instructions contained
in this manual.
The
Spray-gun washer
is manufactured according to the provisions contained in the following European Directives:
- Directive 98/37/CE (Machine Safety).
- Directive 94/9/CE (Equipment to be used in potentially explosive environments).
With reference to the Directive 94/9/CE (“ATEX” directive) the
Spray-gun washer
is a machine designed and built to work in com-
pliance with the operating parameters fixed by
ANEST IWATA EUROPE
and guarantees a normal level of protection in regard to
the
appliances group II, category 2
. The machine supplied is accompanied by the following documents:
- CE Declaration of conformity.
- CE Mark.
- Manual for use and maintenance.
1.1 GUARANTEE
Upon delivery of the
Spray-gun washer
, it is necessary to make sure that no damages have occurred during shipment and the sup-
ply of accessories is complete and undamaged. Claims must be filed within 8 days of delivery. The buyer is eligible for the guaran-
tee coverage only when he has complied with the guarantee conditions listed below.
ANEST IWATA EUROPE
guarantees its products under the following conditions:
a) The
Spray-gun washer
is guaranteed for a period of two years from the date of purchase as certified by a delivery document
issued by the Dealer. When the customer requests guarantee service, he must specify the model, serial number and year of
manufacture of the appliance.
b) The guarantee covers free replacement or repair of the appliance component parts which are recognized to have manufacturing
defects without any charge for labour.
c) Guarantee services are performed at the manufacturer's factory or at authorized service centres. The appliance must be sent
already prepaid to them and shall be returned to the customer at his own expense and risk. If any intervention by technicians is
requested under guarantee coverage at the customer's installation site, then the customer shall be charged for the transfer
time, for mileage and for all board and lodging expenses according to the valid fees applied by the Service Centre. No charge
is made for the time required to repair and replace parts.
d) The manufacturer waives all liability for any damage that may directly or indirectly be caused to persons or property resulting
from failure to comply with all the provisions in the instruction manual. In particular, this regards failure to comply with warnings
about placing, installing, operating and maintaining the appliance. The present guarantee does not cover any reimbursement for
direct or indirect damage due to appliance down-time. Guarantee coverage is only valid when payments are all in due order.
e) This agreement is governed by current law in the Republic of Italy. Any controversy deriving from this agreement shall be set-
tled by the Court in Turin, Italy.
3
SPRAY-GUN WASHER IWK H2O Mod. H2O
