8
EN
Airless and Multi Spray iCon Pumps
WARNING
SAFETY INFORMATIONS
In the case that the unit is operating in an area with potentially explosive atmosphere, the opera-
tors must disable the unit power supply immediately, via the "emergency stop lever".
It is important also to ensure that the unit can’t be restarted unintentionally.
Before to restart the unit, will be necessary to take all security measures to ensure the elimina-
tion of all potentially explosive substances in the environment.
Several safety systems have been conceived during the airless unit design and manufacture to safeguard the operator, in complian-
ce with EN 12621:2010 Directive about paint.
ANEST IWATA ICON PUMPS ARE CONCEIVED TO PAINT FERROUS MATERIAL IN GENERAL, WOOD AND PLASTIC.
WARNING
TO USE THE EQUIPMENT WITH SPECIAL PRODUCTS ASK FOR THE APPROVAL OF THE MANUFACTURER.
DO NOT USE:
- ANY HALOGENATED HYDROCARBON SOLVENTS, SUCH AS TRICHLOROETHANE, METHYLENE CHLORIDE
OR SOMETHING LIKE THAT;
- ANY TOXIC PRODUCTS SUCH AS PETROL, KEROSENE OR COMBUSTIBLE GASES;
- ANY HERBICIDE OR PESTICIDE;
- ANY RADIOACTIVE FLUID;
A 8 BAR CALIBRATED SAFETY VALVE IS INSTALLED TO ENSURE THE PUMP
WORKING PRESSURE DOES NOT EXCEED THE LIMITS INSIDE THE FEEDING CIRCUIT.
WARNING
DO NOT REMOVE THE VALVE PLASTIC PROTECTION.
ANY TAMPERING WITH COULD BE DANGEROUS FOR THE
OPERATOR AND COMPROMISE THE EQUIPMENT GOOD WORKING.
WARNING
IN CASE OF ANOMALIES DURING WORKING, TURN 90° THE
BALL VALVE LEVER FOR EMERGENCY STOP. IN THIS WAY
THE AIR SUPPLY WILL BE INTERRUPTED AND THE RESIDUAL
PRESSURE INSIDE THE PUMP WILL BE RELEASED.
STOP
WARNING
SECURELY GROUND PUMP, SPRAY GUN, WORKPIECE AND CONTAINERS CONTAINING CLENING LIQUID
USED DURING FLUSHING. USE ONLY CONDUCTIVE PAILS PLACED ON GROUNDED SITE.
Insufficient grounding can cause fire and explosion due to the static electric sparking.
10. OPERATION
9. WORKABLE PRODUCTS
8.2 BALL VALVE
8.1 SAFETY VALVE
8. SAFETY SYSTEMS
