5.1
CHECK ON THE PURCHASED PRODUCT
Before using the pump, make sure it has not been damaged during transport or storage.
Also check that all standard components are inside the packaging.
5.2
CONDITIONS FOR INSTALLATION
The installer must know the ATEX classification of the installation area, as well as the risks coming
from a potentially explosive atmosphere, by paying attention to the explosion and fire risks so as to
adopt the most suitable protections.
All maintenance, assembly and disassembly operations must be carried out by a qualified staff out
side the area at risk of explosion.
Also check that the accessories comply with the essential safety requirements of the ATEX directi-
ves. Handle them with great care to avoid changing their features.
Once installed, clean the unit.
The equipment must be installed by a
specialized and authorized staff.
In any case, follow the instructions below.
BE CAREFUL ABOUT VENTILATION
USE IT IN A WELL-VENTILATED AREA. PAINTING OR CLEANING IN A NARROW AREA WITH
INSUFFICIENT VENTILATION CAN CAUSE FIRE OR EXPLOSION DUE TO SPRAYED MIST OF
PAINT OR SOLVENT WHICH CATCHES FIRE.
WARNING
IF PAINTING IS CARRIED OUT OUTSIDE THE SPRAY BOOTH, ALWAYS OPERATE IN A PLACE
WITH A RIGHT VENTILATION TO AVOID CONCENTRATING INFLAMMABLE VAPOURS COMING
FROM SOLVENTS OR PAINTS.
21
5. INSTALLATION AND STARTING
