Anest Iwata DDP 90 C WB, Инструкция по эксплуатации и обслуживанию

Страница: 27 / 60

27
5.1 Use
This section describes the diaphragm pump use in compliance with the safety standards in force.
Read this section carefully.
5.2 Safety rules during use
TO USE the diaphragm pump COMPLY WITH the safety precautions and rules described
below.
The manufacturing company declines all responsibility if the operator does not comply with
them. It is not to be held responsible for any carelessness during the pump use, either.
If the system is used improperly, it could be broken by causing serious damage.
Use the diaphragm pump for professional purposes only.
Do not change the system; use only Anest Iwata original spare parts.
Check the system daily: repair or replace immediately all worn or damaged parts.
Never exceed the maximum working pressure: 7 bar (700 kpa).
IT IS FORBIDDEN to use the equipment for purposes that are different from the ones it is
destined to which are described in the use and maintenance manual. If in doubt, apply to your
Anest Iwata reseller.
Use paints and solvents compatible with the system parts they come in touch with.
Refer to the paint and solvent features mentioned by the manufacturer.
Wear the protective clothes described in section 5.3.
Comply with all the local standards on electric safety and fire risks.
5.3 Clothes
Wear some protective gloves and goggles, an oxygen mask and some ear protections during
working. Always follow the laws in force (Ex. LAW 626/94).
5. USE