28
enabled, the output of inverter
will be off when connected
load is pretty low or not
detected.
Charging by PV energy.
No charging.
Fault mode
Note:
*Fault mode: Errors are
caused by inside circuit error
or external reasons such as
over temperature, output short
circuited and so on.
PV energy and utility can
charge batteries.
Charging by utility and PV energy.
Charging by utility.
Charging by PV energy.
No charging.
Operation mode
Description
LCD display
Line Mode
The unit will provide output
power from the mains. It will
also charge the battery at
line mode.
Charging by utility and PV energy.
The unit will provide output
power from the mains. It will
also charge the battery at
line mode.
Charging by utility.
If “solar first” is selected as output source
priority and solar energy is not sufficient to
provide the load, solar energy and the utility will
provide the loads and charge the battery at the
same time.
Web: anern-marketing.com | Email: [email protected] | Whatsapp: +86 13058030989
