Anemoment TriSonica Mini, Руководство пользователя

Страница: 13 / 36

11 Release Date 9 July 2021 Anemoment LLC
Connecting Up
Getting
power in and data out – Your TSM Sensor will work best if
you give careful attention to the information in this Chapter.
TSM-FB
Exiting the base of the TSM-FB are four unterminated wires for User hook-up. The wires are
color coded to indicate the purpose of each.
• is 9V to 36V.
• is RS-232 TxD (Serial Data Out of the TSM).
• is RS-232 RxD (Serial Data into the TSM).
• Black is Ground and the serial connection return.
Specially configured TSM-FB may have different color wires in the
place of or in addition to these four. Please refer to instructions accompanying
the specially configured TSM-FB for more information.
Connecting the TSM-FB to Other Anemoment Products
•
USB ADAPTER:
Open the Adapter case, and insert the wires exiting the
TSM-FB into the terminal block by color as labeled on the
circuit board. Then connect the Adapter to a computer
using the USB cable. A helpful video demonstrating this
connection is available at Anemoment.com/resources/.
• DATA LOGGER (Circuit Board Only):
The screw terminals on the Data Logger are labeled “A” and “B”. Use the “A” terminals
to attach a single TSM-FB; use both “A” and “B” terminals to attach two TSM-FBs to the
Data Logger board. Insert each wire into the appropriate screw terminal hole and
tighten.
Table 2: TSM-FB to DATA LOGGER SCREW TERMINAL WIRING POSITIONS
YELLOW Wire RED Wire GREEN Wire BLACK WIRE
Single TSM-FB A4 A6 A5 A3
Second TSM-FB B4 B6 B5 B3
Chapter
3
Figure 4: TSM-FB WIRES
Figure 5: TSM-FB to
USB ADAPTER INSERTION