Anedio D2 DAC
8
Using the D2 DAC
Remote Control
The D2 DAC works with the Sony RM-EZ4 Universal Remote, which
was chosen for its ergonomic design. Its large buttons, easily
visible and intelligently placed, make it particularly suitable for
controlling the volume level.
Only those remote keys described in the manual are functional.
For use with the D2 DAC, select the “CBL/SAT” mode.
Channel Selection
The channel can be set either by pressing the channel button on the
front panel or by pressing the c/- button on the remote
control.
When selected, the channel number is displayed momentarily (e.g.,
“
C2
” for Channel
2
).
Volume Control
The volume level can be set either by turning the volume knob or by
pressing the /- button on the remote control.
Holding down the /- button will continually increase or
9
Anedio D2 DAC
decrease the volume level.
The numeric keys on the remote control can also be used to set the
volume level. Simply key in the volume level, followed by the “ENT”
key.
The volume level changes in steps of 0.5 dB. The maximum level,
0
dB, is displayed as “99”. For example, “59” on the display means
that the volume level is -2
0
dB from the maximum.
Safe Volume Level
At power on, the volume level is limited to a safe level (“81” on the
display) in order to prevent accidental damages to loudspeakers or
headphones.
To prevent entering high volume levels accidentally, the level above
“81” cannot be entered directly from the numeric keys, but only by
turning the volume knob or by pressing the key.
As you change the volume from “81” to “82”, you will hear a relay
click. The D2 DAC uses an optimal combination of 32-bit digital
attenuators and relay-controlled thin-film resistor dividers in order to
ensure highest signal-to-noise ratios at realistic listening levels,
Mute (Remote Control Only)
The sound can be muted by pressing the “MUTING” button on the
remote control. Pressing the “MUTING” button again restores the
previous volume level.
Using Another Universal Remote Control
As with most people, we do not like to pile up remote controls in our
living rooms. In case you want to use another universal remote to
control the D2 DAC, we’ve made it easy to do so by using a
common IR protocol that is readily recognized by most universal
remote controls. Simply follow the learning instruction for the
universal remote of your choice, and you will be ready to control the
D2 DAC within minutes.
