15
Step 19:
There are different axle bolt locations for each chassis configuration. Locate the hole to match the chosen
belt and frame size.
Hole Diagram for 6” Wheels
NOTE: The belts should be parallel to the side plates.
Step 18:
Secure the Outside Plates to each Churro Standoff using 1/4-20 x 0.75” thread forming screws (am-1591).
A 1/2” wrench can be used to hold the Churro Standoffs while tightening.
NOTE: Axle bolts must be installed from the outside of the chassis. If they are inserted into the Inside Plate first,
the included bumper hardware will not fit.
Step 21:
For the pulleys that are closest to the
Outside Plate, the Short Axle Spacer (am-1306) will be
closest to the outside plate. The Long Axle Spacer
(am-1307) will be closest to the inside plate.
Step 20:
Take an Outer Wheel Assembly, loop the belt
onto the pulley, and insert the wheel between the
Inside and Outside Plates. Ensure the belts are
straight. One end will have the pulley closer to the
outside plate, the other closest to the inside plate.
BOTTOM VIEW
BOTTOM VIEW
