3.
Place middle upright #2 into the case. The corner without pins should be on the top right. The other pins
should sit on the floor and to the left of the pieces already in the case.
4.
Place middle upright #3 into the case. The corner without pins should be on the bottom left. The other pins
should sit above and to the right of the uprights already in the case.
5.
Place middle upright #4 into the case. The corner without pins should be on the top right. The other pins
should sit between the pins of the uprights already in the case as shown.
6.
Place a left end upright into the case. The corner without pins should be on the bottom left. The other pins will
sit on the uprights already in the case as shown.
Rev 1.2 10/23/14
12
