&Tradition Bellevue AJ8, Инструкции

Страница: 2 / 3

A
03/21
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Content
A
Lamp
Tools needed
- Bulb type E14
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- The lamp is only intended for interior use.
- Lamp shade gets hot after prolonged use.
- Do not place the cable in reach of small children or any-
where there is a risk of falling over it.
- If the external cable or cord of this lamp is damaged,
it must be replaced by the manufacture or a similar
qualified person in order to avoid a hazard.
Cleaning instructions
- The Bellevue lamp is made from solid brass and lacquered
aluminum. The brass used is uncoated and will therefore
develop a unique and beautiful patina over time.
- Wipe surface of lamp shade with a soft, damp spong or
cloth, and wipe immediately after with a dry cloth.
- Do not use any abrasive cleaning tools such as steel
wool, scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit,
terpentine household glass cleaner or cellulose thinners.
- Only wipe the inside of the shade with a soft, damp cloth
or feather duster.
Step 1
The lamp is delivered fully assembled. Instal the light bulb.
Step 2
Insert the plug into a wall socket and use the switch on
the cord to turn the lamp on and off.
Step 3
Use the flexible swan-neck to set the shade at a desired
angle. It is best to set the angle before turning the lamp
on as the shade gets hot when the lamp is in use for longer
periods of time.
For indoor use only
E27 maximum 25W
Bulb not included
Bellevue AJ8
Arne Jacobsen
1929