COMMON PROBLEMS AND REMIDIES
*Irregular Darkening Dimming
Headband has been set unevenly and there is an
uneven distance from the eyes to the filter’s lens.
Reset headband to reduce the difference to filter.
*Auto-darkening filter does not darken or flickers
Front cover lens is soiled or damaged (change cover
lens)
Sensors are soiled
(clean the sensors’ surface)
Welding current is too low.
*Slow Response
Operating temperature is too low (do not use at
temperatures below
–5
℃
)
When the battery power in the filter screen is inadequate,
please stop using and change a new filter cartridge.
*Poor Vision
Front/inside cover lens and/or filter lens are soiled
change lens)
There is insufficient ambient light.
The protective film of the front/back cover lens is not
peeled off.
*Welding Helmet Slips
Headband is not adjusted properly (readjust headband)
Warning!
Operator must stop using the auto-darkening welding
helmet immediately if the above mentioned problems
cannot be corrected. Contact the dealer.
LENS & HELMET MAINTENANCE
Replacing the front cover lens
if it is damaged (cracked,
scratched, soiled or pitted)
Step 1
: Remove the back cover.
Step 2
: Take out the auto-darkening cartridge.
Step 3
: Take out the rubber seal with the front cover lens.
Step 4
: Take out the front cover lens.
Step 5
: Place the new front cover lens into the right position.
Step 6
: Place the auto-darkening cartridge and the back cover into
the position.
THCHNICAL SPECIFICATIONS
Viewing Area: 92
×
42mm
Size of Cartridge: 110×90×9mm
Light state: DIN 3
Darken state: DIN11
Switching Time: <0.0003s
UV/IR protection: Up to DIN15
Operating Temperature: -5
℃
~+55
℃
Storing Temperature: -20
℃
~+70
℃
Helmet Material: High-impact resistant plastic/Polyamide Nylon.
Total Weight: 420g
THE PARTS LIST OF THE HELMET
THE PARTS LIST OF THE HEADBAND
1. NUT 2. SPRING
3. LOCATING PIECE-1
4. ADJUSTABLE BUCKLE
5. SCREW
6. EQUATION
7. LOCATING PIECE-2
SHADE GUIDE TABLE
NOTE:
PLEASE USE THIS GUIDE TO ENSURE YOU ARE USING THE
CORRECT WELDING HELMET FOR THE TYPE OF WELDING
CARRIED OUT.
