Andritz Aqua-Screen ASC-013-013-194 Скачать руководство пользователя страница 23

Страница: 23 / 316

QUEENSLAND URBAN UTILITIES

QUU CONTRACT NO: C112-022

LUGGAGE POINT STP/LUGGAGE POINT

OPERATION & MAINTENANCE MANUAL

Chp2InstallSetUp.doc

DRAFT: A 23-Jul-13

Page 2 of 10

2.2

AQUA-SCREEN

STORAGE INSTRUCTIONS

When the Aqua-Screen

is stored for any length of time, ANDRITZ recommends the following

instructions:



The Aqua-Screen

may be stored outdoors with caution when the temperature falls below 0°C.

When stored outside, the Aqua-Screen

must be covered with a tarp, and drive motors must be

sealed and covered to protect them from moisture.



Damage may occur if the Aqua-Screen

is stored indoors in a dusty environment or construction

area. Therefore, the Aqua-Screen

must be covered with a tarp and kept out of high-traffic areas.



The drive motor must be covered and sealed with plastic wrap to protect it from moisture.

Additionally, the motors must be rotated every 6 months. Remove the fan cover before rotation

and replace it afterward.



The roller bearings must be greased once a month to displace any moisture that may

accumulate.



The Aqua-Screen

must be covered with a tarp to prevent any damage from nearby welding or

painting.

Note: Particular attention should be paid to miscellaneous tools and other

small items. It is essential that the customer keep a good inventory record of

all equipment in storage. This equipment has been accepted as complete

during the signing of the shipping bill of lading. Therefore, any missing parts

shown on the packing list will be the customer’s responsibility.

2.3

INSTALLING THE AQUA-SCREEN

2.3.1 Basic Aqua-Screen® Installation Instructions

The Aqua-Screen

arrives without the main drive unit and chain guard mounted. These items are

removed before shipment to prevent damage to them and to better balance the Aqua-Screen

during installation.

The customer is responsible for providing a proper foundation for the ANDRITZ Aqua-Screen

This includes, but is not limited to, ensuring that the foundation is strong enough to support the

floor loads and that the concrete is resistant to any chemicals which may be present in the filtrate.

The primary concern is that the foundation is level. Exact leveling is critical in achieving optimal

performance of the Aqua-Screen

. The foundation must be level to within a tolerance of ±1.6 mm.

Anchor bolt locations are shown in the mechanical drawings.

The Aqua-Screen

must be placed into position by lifting it with an overhead crane. The equipment

must first be offloaded from the truck using the lifting eyes at the drive end of the unit and the lifting

eyes welded to the outside of the frame. See figure 2-1.

If the Aqua-Screen is subjected to freezing temperatures, then all lubrication must be replaced before use.

Luggage Point STP ST18 Pre Treatment (Aqua-Screen (Andritz) Operation and Maintenance Manual) General

Q-Pulse Id: TMS579

Active: 13/12/2013

Page 23 of 316

Содержание Aqua-Screen ASC-013-013-194





























































































































































































































































































































Результаты поиска

Содержание Aqua-Screen ASC-013-013-194

Отзывы:

Andritz Aqua-Screen ASC-013-013-194, Руководство по эксплуатации и техническому обслуживанию, Страница: 23 / 316

Результаты поиска

Содержание Aqua-Screen ASC-013-013-194

Отзывы: