andrews RSC 18/270, Руководство по обслуживанию

Страница: 36 / 56

Fig. 28
Error code shown in
water heater display
Max Setpoint value
water heater display
6.6.1 Sequence of modes available in ‘Service Mode’
by pressing the ‘Select’ button
Error Code Number (Display/Reset). This is only shown if there is
an operating error in the ‘User Mode’ (Fig. 28).
1. Max Setpoint (Display/Change) (Fig. 29).
Fig. 29
2. Water Temperature Average (Displays average if there
are two sensors – sensor temperature displayed if single
sensor is used) (Fig. 30).
Fig. 30
2b. Water Temperature - Upper Sensor (Displays if there is
an upper sensor – some models) (Fig. 31).
Fig. 31
idle
idle
idle
36 Issue 4 21042018