AE04B-A0279 Rev. -- SAFETY SUMMARY
Document use is restricted to that described on cover
ii
SAFETY SUMMARY
High voltage is used in the operation of this
equipment. Death on contact may result if
personnel fail to observe the following
safety precautions:
Do not be misled by the term "Low Voltage." Potentials as low as 50 volts may cause death under
adverse conditions.
Do not crush, puncture, disassemble, or otherwise mutilate batteries. Leaking batteries can cause
serious damage to equipment and injury to personnel.
Do not remove covers or access plates on the equipment unless you are authorized to do so.
Do not work on electronic equipment unless there is another person nearby who is familiar with the
operation of the equipment and is trained in administering first aid.
Whenever possible, disconnect the equipment from the power source before beginning maintenance.
To prevent electrical shock or damage to the equipment, do not operate it until you thoroughly
understand the operation and function of all controls, indicators, and connectors.
Turn off all power to the equipment before replacing any fuses.
FIRST AID
In case of electrical shock:
Do not try to pull or grab the individual.
If possible, turn off the electrical power.
If you cannot turn off the electrical power, pull, push, or lift the person to safety using a dry wooden pole,
a dry rope, or some other insulating material.
Send for help as soon as possible.
After the injured person is no longer in contact with the source of electrical shock, move the person a
short distance away and immediately administer first aid and artificial resuscitation as required.
