4 Installation and Comissioning
Page 17
3.
Align the donor antenna towards the BTS.
4.
Align the coverage antenna.
As the default settings of the repeater are set to
Auto Gain enabled
, only the
frequencies have to be adjusted. Additionally, the repeater can be customized with a
laptop or PC via Ethernet connector:
5.
For local connection, connect the
straight
CAT 6 patch cable to the Ethernet
connector of the MRx18 and the network connector of a laptop or PC.
Start a browser (e.g. Internet Explorer 7 or higher, or Mozilla Firefox) and enter
IP
address of the repeater
6.
Enter user name: and password to login
7.
Commission the repeater according to the description in the following chapter and
save settings to the repeater.
8.
Disconnect CAT 6 patch cable and check LEDs and display of the repeater.
