4 Installation and Comissioning
Page 15
4. INST ALLATION AND COMISSIONING
4.1. MECHANICAL INSTALLATION
To mount the MRx18 to a wall, proceed as follows:
1.
Fasten the wall-mounting
bracket by means of 2 proper
screws (through the pressed-
in thread nuts) to a wall. (The
screw type depends on the
quality of your wall).
MRx18
miniRepater
Wall
Wall-mounting bracket
2 thread nuts
figure 4-1 Wall-mounting bracket
2. Insert the mRx18 to the wall-mounting bracket.
3. Fasten the MRx18 and wall-mounting bracket by means of 2 metric M5x50 fillister-
head screws to the wall.
2 M5x50 screws
rear side
front side
Wall
behind
bracket
Wall
figure 4-2 Wall mounting procedure
