12
Electrical information
Please note:
It is extremely important that the wires or cores in the flex are connected to the correct
terminals in the plug. If the colour of the mains lead of the appliance does not
correspond with the coloured
markings identifying the terminals
in your plug proceed as follows:
The
Live
(
Brown
) wire
connects to the right- most
live (L) terminal nearest to
the fuse.
The
Neutral
(
Blue
) wire
connects to the left-most
neutral (N) terminal.
The
Earth
(
Green and
Yellow
) wire connects to
the central, top most
earthed (
E
) terminal.
Warning
:
If the appliance is double insulated indicated by the double insulated symbol:
it should not have an earth wire or earth connection.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the case
of the plug. Only BSI or ASTA approved fuses should be used. When changing the fuse
always replace it with a fuse that is of the same identical rating as the original. If you
are unsure about which plug or fuse to use, always refer to a qualified electrician.
Please note after replacing the fuse, ensure that the cover is correctly fitted back onto
the plug. Never attempt to run the appliance if the plug does not have a cover. If a
moulded plug is fitted and has to be removed take great care in disposing of the plug
and severed cable, it must be destroyed to prevent it from engaging into a socket. If the
supply cord is damaged it must be replaced by a service agent or a similarly qualified
person in order to avoid a hazard.
