•
Ensure the appliance is placed on a level, heat resistant surface.
Allow adequate air space below, above and on all sides of the
appliance for ventilation,
•
Do not operate the appliance by means of an external timer or
separate remote
-
control system.
Class I Electrical Safety
Always ensure the voltage on the rating label corresponds to the supply voltage.
WARNING!
This appliance must be connected to an earthed electrical power
supply. The green/yellow conductor in the supply cord must be connected to the
Earth terminal in the plug. The power supply must have an Earth connection.
Check the power cord and plug regularly for any damage. If the cord or the plug is
damaged, it must be replaced by a qualified electrician or a service repair centre to
avoid a hazard.
Precautions should be followed for safe cable management and connection to the
power supply
If a new mains plug needs to be fitted follow the fitting instructions supplied with
good quality BS1363A plugs. If in doubt consult a qualified electrician or appliance
repair agent.
a) Remove and safely dispose of the old plug
b) Connect the brown lead to the live terminal “L” in the new plug
c) Connect the Blue lead to the Neutral “N” terminal
d) Connect the green/yellow lead to the earth “E” terminal
e) Recommended fuse size: 3A
Use of an extension cable is not recommended. If an extension cable is required, it
should be rated no less than 13A and be fully unwound before use to avoid
overheating. Do not connect multiple appliances to the extension cable
Do not attempt to modify electrical plugs.
Voltage (V)
220
-
240
Frequency (Hz)
50/60
Power (W)
320
-
380
Recommended Fuse (A)
3