
7
When cooking chips, a maximum amount of 600g is recommended at one
time.
Do not overfill the basket with food as this will lower the oil temperature
causing food to become soggy and undercooked
Using the appliance
1.
Make sure the appliance is unplugged and switched off. This will be indicated
by the control lamps being off.
2.
Take the lid off the deep fryer.
3.
Remove the frying basket and fill the container with oil/grease. Please note
the oil/grease must be filled between the minimum and maximum level
indicated inside the container. If you are using solid fat, cut the fat up into
small pieces and place it on the floor of the container.
DO NOT
place solid fat
into the deep frying basket.
4.
Put the lid back on.
5.
Insert the plug into the power socket. The red control lamp lights up. Set the
desired temperature by turning the temperature control.
6.
The green control lamp lights up when the temperature is selected.
7.
Place the food into the frying basket.
8.
Once the set temperature has been reached the green control lamp goes off.
Take the lid off and lower the frying basket slowly into the hot oil.
9.
During frying the green control lamp will switch on and off indicating the
temperature is being controlled by the thermostat.
10.
At the end of the frying time (this should be indicated on the recipe or food
packaging) open the lid carefully as hot steam may be released.
11.
Remove the frying basket from the oil and place it into the rest position on
the container, allowing the excess hot oil to drain.
12.
To switch off the appliance, turn the temperature regulator off and remove
the plug from the socket.
CAUTION: The deep fryer generates a lot of heat during the cooking process. Take
care not to touch or block the steam ventilation on the lid.