DN:KD-926-SMSY01 V1.0 Operation Guide
7/16
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, the batteries and the cuff, must be disposed of according to local
regulations at the end of their usage.
3. CLOCK AND DATE ADJUSTMENT
a. Once you install the battery,the Blood Pressure Monitor will enter Clock and Date
Adjustment Mode. When you turn off the monitor, it will enter Clock Mode, and
LCD will display time and date.
b. While the monitor is in Clock Mode , adjustment can be reached by pressing both
the “START/STOP” and “MEM” button for 1 seconds in Clock Mode to change the
time.See
picture3
.
c. In Clock and Date Adjustment Mode , the time format will blink at first , see
picture3-1
.The default time format is 24h(Europe Version) and the default clock
and date is 2016-1-1 12:00.
d.
Press the button “START/STOP” repeatedly, the year (first usage: default is 2016,
range is 2016~2099), month, day, hour and minute will blink in turn, see
picture3-
2&3-3 & 3-4 & 3-5 & 3-6
.
While the number is blinking, press the button “MEM” to
increase the number, keep on pressing the button "MEM", the number will
increase faster.
Picture 3 Picture 3-1 Picture 3-2 Picture 3-3
Picture 3-4 Picture 3-5 Picture 3-6
e. During adjusting clock and date, the monitor will go back to Clock Mode
automatically when no button will be pressed within 60 seconds.
f.
You can turn off the monitor by pressing “START/STOP” button when the minute
is blinking, then the time and date is confirmed.
Note:
3.1 The clock format could be set by user.