DN:KD-752-SMSY01 V1.0 Operation Guide
7/19
Picture 1-1 Picture 1-2 Picture 1-3
When LCD shows battery symbol
, replace all batteries with new ones.
Rechargeable batteries are not suitable for this monitor.
Remove the batteries if the monitor will not be used for a month or more to avoid
relevant damage of battery leakage.
Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately
rinse with plenty of clean water and contact a physician.
The negative terminal of the battery needs to be compressed into the battery
compartment properly after horizontal compression of the negative electrode. The battery
is in contact with the spring.
Make sure the battery cover is intact and not damaged before installing the battery.
The monitor, the batteries and the cuff, must be disposed of according to local
regulations at the end of their usage.
2. CLOCK AND DATE ADJUSTMENT
a.
Once you install the battery, it will enter Clock Mode, and LCD will display time and
date.
See picture 2-1
. The monitor will enter Standby Mode after 10 seconds with no
operation.
b.
While the monitor is in Clock Mode or Standby Mode, press
the “START” and “MEM”
button simultaneously for two seconds, then release the buttons, the monitor will be
in Clock and Date Adjustment Mode.
c.
In Clock and Date Adjustment Mode, the time format will blink at first.
See picture 2-2
.
While time format is blinking, press the button “MEM” to change the time format. The
default time format is 24h.
d.
Press the button “START” repeatedly, the year (range is 2019~2099), month, day,
hour and minute will blink in turn.
See picture 2-3 & 2-4 & 2-5 & 2-6 & 2-7
. While the
number is blinking, press the button “MEM” to increase the number, keep on
pressing the button "MEM", the number will increase faster.
e.
During adjusting clock and date, the monitor will turn off automatically after 1 minute
with no operation.
f.
You can turn off the monitor by pressing “START” button when the minute is blinking,
