THE TWO MEASURING MODES
The meter provides you with two modes for measuring, General
and CTL. The CTL mode should be used when a control solution
is being tested. See the table below.
CTL testing with the control solution
You can switch between each mode by:
1. Start with the meter turned off. Insert a test
strip to turn on the meter, the screen will dis-
play a flashing blood drop.
2. Press “S” to select General or CTL mode.
TESTING WITH BLOOD SAMPLE
o reduce the chances of infection:
●
Choose a clean, dry work surface.
●
●
Always use a new and sterile lancet. Lancets are for single
use only.
●
●
Avoid getting lotion
、
oils
、
dirt or debris in or on the lancet
and lancing device.
Note: Before testing, please read the following steps thoroughly
and carefully, please relax and do the test step by step. Simplif-
ying or changing the test procedure may produce inaccurate
results.
